This discussion forum has been created for participants to share ideas, information and breakthroughs related to the development of the innovative Keppe Motor technology.


    Your first subject

    avatar
    Tom

    Posts : 8
    Join date : 2009-01-13
    Location : California

    Your first subject Empty Capacitance

    Post  Tom on Fri Mar 20, 2009 12:46 am

    No, I could not get a decent reading of capacitance. Maybe it is so small that the inductance dominates the measurement.
    avatar
    j greef

    Posts : 36
    Join date : 2008-12-31
    Location : Europe

    Your first subject Empty digital model data values

    Post  j greef on Thu Mar 05, 2009 2:06 pm

    Did you measure any capacitance ? (a real coil as a rule can be modelled as an inductance and a resistance (in series) parallel to a capacitance).


    Tom wrote:I measured the inductor parameters with an LCR meter.

    It measured 54.1 mH inductance with 46.6 ohms in series at 1kHz.
    avatar
    Tom

    Posts : 8
    Join date : 2009-01-13
    Location : California

    Your first subject Empty digital model

    Post  Tom on Tue Mar 03, 2009 9:52 pm

    I measured the inductor parameters with an LCR meter.

    It measured 54.1 mH inductance with 46.6 ohms in series at 1kHz.
    avatar
    Saulo

    Posts : 1
    Join date : 2008-12-25

    Your first subject Empty Keppe Motor Digital Model

    Post  Saulo on Thu Dec 25, 2008 9:13 am

    Is there already a digital model for this motor?
    I would like to get it to perform simulations and to forsee the reactions of the motor to some excitation signals...
    Is there?
    Saulo
    Shocked Question
    Admin
    Admin
    Admin

    Posts : 44
    Join date : 2008-12-17
    Location : Sao Paulo, Brazil

    Your first subject Empty Your first subject

    Post  Admin on Wed Dec 17, 2008 1:53 pm

    Take some time to read this information before starting to use the administration of your forum:

    How to access your administration panel ?
    In the top menu, click on Log In, a new page is displayed. Fill in the username "admin" and the password you have choosen during your registration. If you have lost or forgot it, click here. Once you are logged in, click on the link "Administration Panel" at the bottom of the page.

    How to modify your board's appearance ?
    You can modify your board's appearance by choosing a theme (each theme displays different pictures, colors and icons). To do that, go to the administration panel, then click on Management in the Styles Admin menu and choose one of the displayed themes. You can later change it or choose another one.

    How to manage the categories and forums ?
    You can add, modify and delete the categories and forums that you have created anytime and without limit. To do that, go to the administration panel, in the management part of the Forum Admin, and click on "Add a link" (a forum or a category). In a first time, we advice you to create test categories and test forums that you will delete later, in order to understand how this tool works.

    Sponsored content

    Your first subject Empty Re: Your first subject

    Post  Sponsored content


      Current date/time is Sun May 26, 2019 7:23 pm