Keppe Motor Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.

This discussion forum has been created for participants to share ideas, information and breakthroughs related to the development of the innovative Keppe Motor technology.


2 posters

    Test results: motor tuning

    avatar
    j greef


    Posts : 36
    Join date : 2008-12-31
    Location : Europe

    Test results: motor tuning Empty Test results: motor tuning

    Post  j greef Mon Feb 02, 2009 1:51 pm

    Hi,

    There seem to be quite some doubts about the tuning of the motors. Hopefully, enclosed graph can provide some guidance. It shows the influence of the angle between the rotor magnets and the little magnet on rotor rpm. As you can see, for 2 angles, motor rpm drops to zero.
    Please mind that the measurements are only approximations but the general picture should be quite OK. When you have a look at the oscilloscope pictures the dip in motor speed in what I indicated as “special area” seems to have a physical background though I have no clear idea about why that happens.

    Test results: motor tuning Tuning10
    avatar
    Ângela Stein


    Posts : 17
    Join date : 2009-04-17
    Location : São Paulo, Brazil

    Test results: motor tuning Empty Resonance

    Post  Ângela Stein Mon May 04, 2009 12:45 pm

    Mr. J Greef,

    Probably between 180º and 250º, the coil and the rotor magnetic fields tend to cancel out, and the motor loses thrust.
    In other words, the motor loses resonance. Notice that the best resonance points are 45º and 135º.
    Anyway, more tests need to be done.
    You could also measure the current in this points: 45º, 135º, 180º, 230º, 270º.

    Keppe Motor Team

      Current date/time is Mon May 06, 2024 7:36 am